AI for the buildings you already run.
Cameras, drawings and data you already have, turned into answers. We build computer vision, 3D digital twins and AI agents for facility teams.
- Offices
- Banks
- Hospitals
- Schools
- Factories
- Hotels
One team for the whole building.
From the camera on the ceiling to the panels on the roof. Start with the problem that costs you most, and add the rest when you’re ready.
CCTV that catches ACs running in empty rooms.
EnergyCam turns the cameras you already have into an energy watchdog. It counts people, checks every AC in view, and alerts your team the moment cooling runs in an empty room.
Explore computer vision
Your building in 3D, from its PDF drawings.
We turn the floor plans you already have into a live 3D model. Anyone on your team can find a room, trace an exit route or plan the roof, from a link.
Explore digital twins
AI that checks every quotation, line by line.
Explore AI agents
QR tags, work orders and reminders on every phone.
Explore facility portals
HVAC and BMS energy audits, plus rooftop solar.
Explore energy + solarWatch the problem. Then watch the fix.
Each scene plays a problem we see in buildings every week, then the system we build for it. Switch services, flip between problem and solution, and drag to look around.
Built on what’s already in your building.
No rip-and-replace. We start from your cameras, drawings, bills and processes, and add intelligence on top.
EnergyCam waits 10 seconds to be sure, then emails your team a snapshot.
Existing IP cameras, PDF drawings and email are enough for a pilot.
Streams reconnect by themselves and log a heartbeat every 30 minutes.
Vision, twins, agents, portals and energy, designed to work together.
Different buildings. The same leaks.
Wherever there are ACs, plant rooms, drawings and vendors, there is money to save. Here is where each service fits.
Offices and HQs
Meeting rooms cooled with nobody in them, and quotations nobody has time to check.
Banks and branch networks
Dozens of branches cooled after hours. EnergyCam watches them all from existing CCTV.
Hospitals and clinics
Plant rooms that can't fail. Tagged assets, scheduled maintenance and proof of every job.
Schools and universities
Classrooms empty by mid-afternoon, and campus maps nobody can read in a hurry.
Factories and warehouses
Big roofs and big loads. Audit the HVAC first, then put solar on the roof.
Hotels and malls
Many floors and many visitors. Exit routes in 3D and cooling that follows occupancy.
Start with one floor. Scale what works.
Site walk
We visit, look at your cameras, drawings and bills, and agree on the problem worth solving first.
Pilot
A working system on one floor, building or plant room, measured against your real numbers.
Roll out
Extend to the whole site once the pilot has proven itself, with your team trained along the way.
Support
Monitoring, fixes and a regular report of what the system caught and what it saved.
The room emptied. The AC didn’t notice.
EnergyCam is our first product in the field. It reads the CCTV stream, counts people with YOLOv8, checks each AC, and emails the facilities team a snapshot when cooling runs in an empty room. When someone returns or the AC goes off, a second email closes the alert.
- Two ACs per room, tracked separately, with readings smoothed over four frames.
- One alert per event, then a “resolved” email with how long the waste lasted.
- A live dashboard with a cost ticker in rupees, month-on-month waste and CO2 impact.
EnergyCam promo · 35 seconds
Your building. Your data. Your call.
We design every system so your team stays in control and sensitive data stays where it belongs.
Runs on your site
EnergyCam can run on a computer inside your building, next to the cameras.
Counts, never identifies
Computer vision counts people in a room. It does not recognise who they are.
A person decides
AI agents check and recommend. A person on your team approves every spend.
You own the data
Logs, models and reports belong to you. We never share them with vendors.
“Mimar means architect. After years inside plant rooms and on site walks, the same problems kept coming back. Mimar AI builds the tools I wished I had.”Shamroze Nasir · Founder, Mimar AI · Facility engineer, Karachi
What worked, what broke, and what it cost.
Questions facility teams ask us.
Do we need to buy new hardware?
Usually not to start. EnergyCam runs on your existing IP cameras, digital twins start from your drawings, and the quotation agent works from email. We tell you up front if anything extra is needed.
How does a project start?
With a short site walk and a conversation about what costs you most. Then we run a small pilot on one floor, one building or one plant room, so you see results before rolling it out.
How is pricing worked out?
Every building is different, so we scope each project after the site walk and send you a clear quote.
Where do you work?
We are based in Karachi and work with buildings across Pakistan. Message us on WhatsApp to talk about your site.
Who is behind Mimar AI?
Mimar AI was founded by Shamroze Nasir, a facility engineer who spent years running buildings. Everything we build comes from problems he saw on site.
Tell us about your building.
Send a message with your building type and the problem that costs you most. We’ll suggest where to start.